Expert Shower Repair Services for Buffalo Bathrooms
A properly functioning shower is essential to your daily comfort. Our repair service addresses all types of shower issues, restoring proper operation and preventing further damage. We serve homeowners throughout Buffalo with expertise and attention to detail.
Common Shower Problems We Address
- Leaking Faucets or Handles: A shower that drips even when turned off wastes water and can eventually cause damage to fixtures and surrounding areas. Leaks typically result from worn internal components:
- Cartridge-Style Faucets: Common in modern single-handle showers. The cartridge contains all moving parts and can be replaced as a unit.
- Compression-Style Faucets: Found in older two-handle setups. These use rubber washers and brass seats that wear over time.
- Ceramic Disc Faucets: Modern high-end fixtures use ceramic discs that are very durable but can occasionally fail.
- Temperature Control Issues: If you can't achieve the desired temperature, or if water fluctuates wildly when other fixtures are used, you may have a problem with:
- Pressure-Balancing Valve: Required by modern codes to prevent scalding, these valves can fail or become clogged with debris.
- Thermostatic Valve: Found in higher-end showers, these maintain precise temperature but have complex internal mechanisms.
- Mixing Valve: The basic valve that combines hot and cold water can develop internal problems.
- Diverter Valve Failure: When water won't switch from the tub spout to the showerhead, or only a trickle reaches the shower, the diverter needs attention. Divers can be:
- Built into the tub spout: A simple mechanism that can often be replaced with the spout
- A separate valve: A dedicated diverter valve that may need cartridge replacement
- Part of a multi-function transfer valve: Found in showers with multiple outlets (body sprays, hand showers)
- Low Water Pressure: Weak flow from your showerhead can result from:
- Clogged showerhead (mineral deposits from hard water)
- Partially closed shut-off valve
- Restriction in the shower arm
- Underlying supply line issues
- Shower Pan or Enclosure Leaks: While often related to tile and grout rather than plumbing, we can help diagnose leaks around the base and advise on necessary repairs.
Our Diagnostic Approach
When you contact us for shower repair in Buffalo, we begin by understanding the specific symptoms. We then:
- Identify the Fixture Brand and Model: Knowing the manufacturer helps us understand the internal mechanism and ensures we have the right parts.
- Access the Internal Components: Depending on the fixture, this may involve removing a handle, trim plate, or escutcheon.
- Inspect for Visible Damage: We look for corrosion, mineral buildup, worn seals, or broken parts.
- Test Operation: We manipulate the valve to understand how it's behaving and where the failure lies.
- Measure Water Pressure: If temperature fluctuations are an issue, we may check incoming water pressures to ensure the balance is correct.
Repair Timeline for Buffalo Service Calls
- Simple cartridge or stem replacement: 1 to 2 hours
- Diverter repair or tub spout replacement: 1 to 1.5 hours
- Pressure-balancing valve repair: 1.5 to 2.5 hours
- Full valve replacement (behind wall access): 3 to 5 hours
Pricing Estimates
- Basic repairs (washer/seat replacement): $125 - $250
- Cartridge replacement: $200 - $450
- Diverter repair: $150 - $350
- Full valve replacement: $500 - $1,200
We provide written estimates before beginning work and stand behind our repairs with a warranty on parts and labor.